Malaysia’s Rooftop Solar Reset: Why the End of 1-to-1 Net Metering Changes the Economics for Every Business

From NEM to ATAP: A Policy Break, Not a Tweaking

On 1 January 2026, Malaysia replaced its long-running Net Energy Metering scheme with the Solar Accelerated Transition Action Programme, known as Solar ATAP. The change is not cosmetic. Under the old NEM framework, exported solar electricity was offset against imported electricity on a one-to-one basis. Under Solar ATAP, the priority is direct self-consumption: the more solar electricity a business uses in real time, the more it saves.

The export compensation rate tells the story. Directly consumed solar energy displaces retail electricity priced at roughly RM0.2723 to RM0.3132 per kWh, while exported energy is compensated at approximately RM0.18 per kWh based on the system marginal price. The gap between those two numbers is the new economics of rooftop solar in Malaysia.

Why the Government Changed the Rules

The shift reflects a deliberate policy choice to align rooftop solar incentives with grid cost recovery. Under NEM, every exported kilowatt-hour carried a subsidy element, and the scheme was quota-based and prone to queues. Solar ATAP removes fixed quotas and moves to a first-come, first-served structure, while requiring solar users to continue paying network and capacity charges.

The design intent is to make rooftop solar “cost-neutral” to the electricity system—rewarding energy efficiency and self-consumption rather than pure export volume. For commercial and industrial users, the message is clear: size your system to your daytime load, not to your roof’s maximum potential.

The Residential Demand Shock

The impact on residential uptake has been immediate. BloombergNEF forecasts that Malaysia’s residential rooftop solar installations will fall from 334 MW in 2025 to approximately 100 MW in 2026, driven by weaker project economics under ATAP. The decline is not a market failure; it is a predictable response to a policy that values exported electricity less than before.

For households that consume most of their electricity in the evening, the economics are less attractive. For households with daytime occupancy, air-conditioning load, or electric vehicle charging, the case remains viable but requires more careful sizing and load management.

The Commercial and Industrial Opportunity

The commercial and industrial segment faces a different calculus. Factories, warehouses, shopping malls, and data centres often have daytime load profiles that align well with solar generation. For these users, Solar ATAP can still deliver attractive returns because the avoided cost of retail electricity is high and self-consumption rates can be maximised.

The key variable is the load factor. A facility that operates one shift and closes at 6 pm may capture only a fraction of its solar generation on-site. A cold-storage warehouse or a semiconductor fab that runs 24 hours with steady daytime demand can absorb a much higher share. Under ATAP, load profiling becomes as important as roof area.

What the Policy Shift Means for Installers and Financiers

The rooftop solar industry is adjusting to a smaller but more economically rational market. Installers that built their business on export-optimised systems are pivoting toward load analysis, battery storage, and energy management services. Financiers are recalibrating payback assumptions, particularly for residential customers who were previously sold on export credits.

Malaysia’s rooftop solar market is not shrinking into irrelevance. It is maturing. The ATAP framework rewards customers who treat solar as a self-consumption asset rather than a generation arbitrage play. That is a harder sell, but it produces a more durable market.